WAM Mist Injection System

This “WAM System” creates a “water mist” emulsion of micron sized particles that is pulled into the intake manifold of your engine by the engine vacuum. The “mist mixture” is instantly vaporized and combines with the air/fuel mixture from your fuel induction system. The temperature of the air fuel mixture is reduced and the “volume” becomes more dense. This increases the amount of power produced for the same amount of gas used. The system’s effectiveness can be enhanced with the addition of denatured alcohol being added to the water at a rate of one part alcohol to 3 parts of water. The denatured alcohol increases the burn rate of the fuel / air mixture. The water / alcohol mixture causes a “cleaner burn”. This mixture actually cleans the combustion chamber of your engine. H2O is a by product of the normal internal combustion engine.

The “WAM System” comes with all hoses, connectors, valve and canister. Complete, easy to use instructions are included. You add water and denatured alcohol ( available at Lowes and Home Depot), if you choose. You will typically refill water when you fill up for gas.

The large WAM systems have an overall height of 10″ and are for use in trucks, S.U.V.’s, large cars or for anything with a large engine bay. Larger WAM System units can be custom manufactured to your specific needs.

The units are safe and easy to operate. Due to “regulations” in various states, we sell these units for “Off Road Use Only”. Since you are installing this unit, you do so at your own risk. These units can be installed with other products such as Hydrogen Generators, PCV Enhancer, O2 Sensor Enhancer, MAP/ O2 Sensor Controller, etc.

Test Vehicles & Results:
We chose two totally different vehicles to test our WAM system on to ensure that our systems will work on any vehicle you might have!

-Our first test vehicle to use this system is our ‘69 Hot Rod Pick Up Truck with 350 CI (5.7L) V8 and 4 barrel after market carb. With the addition of our Large WAM system and carburetor enhancer have recorded consistent 30% + fuel savings on this large engine which is a tough thing to do.

-The second test vehicle is a 144,000+ mile 1997 Mitsubishi Mirage 4 door with a 1.5L Fuel injected 4 cylinder. This car went from 25 mpg city driving to over 38 mpg with the addition of the Small Water/Alcohol Mist (WAM) system from GasSavingSolutions.com with no other tweaking period. We decided to use this vehicle also because of its high mileage to show that our systems will not harm your vehicle no matter what the mileage as long as the engine is in good running order.

-Current testing is being done with a ‘99 Chevy Suburban with 5.7 L. engine. The vehicle is equipped with a ScanGuage II which provides continuous readout of engine functions. To date, the vehicle has increased it’s daily MPG from 11 MPG to 17 MPG. We will update the results as time goes on.

Your results will depend directly upon the running condition of your vehicle, and your driving habits. You may or may not experience similar increases in MPG.

-Gas Savings in terms of dollars

If you spend $1000 a year on gasoline or diesel, a conservative 20% savings in fuel would save you $200 in your first year!

If you spend $2000 a year on gasoline or diesel a conservative 20% savings in fuel would save you $400 in your first year!
More then paying for the cost of your GASsavingSOLUTIONS.com Water injection system

These units come ready to install with all hoses and instructions. These units will ship in 3 to 5 days and be recieved within 7 to 10 buisness days!

Get more information at GasSavingSolutions.com