DiabloSport Predator Programmers 1998-2004 Mustang V6, GT, Cobra

March 18, 2009 by Hydrogen  
Filed under Parts

316-predatorThe Predator from DiabloSport is a state-of-the art, high performance tuning, flash programmer that comes in a sleek handheld design. Once connected to the vehicle, the Predators internal computer recognizes the vehicles Powertrain Control Module (PCM) and automatically picks the proper tuning files designed specifically for that PCM.

Unlike other “tuners”, DiabloSport’s programming is performed in very small increments throughout the entire RPM range. This gives your vehicle a a smoother, wider and a more predictable power delivery. The Predator’s memory stores the actual tuning files that optimize spark timing and air/fuel ratio curves. Transmission parameters are remapped to improve shift characteristics, such as shift points and firmness. DiabloSport engineers spend many hours on the dyno, street and track to ensure the tunes provided with the Predator are the best they can be.

Dyno Tested Performance Tunes

The Predator was created with one thing in mind, POWER! Average power gains are per tune. The Predators’ additional power makes itself noticeable immediately with an increase in power that starts in the low RPMs and builds into a frenzy at the high RPMs.

A Predator equipped vehicle will notice significant improvements in drivability. The additional power and improved shift patterns created by the Predator tune will yield quicker acceleration and better mileage, whether it is in town or out on the highway.

Combine the Predator with a Free Flow Exhaust and Cold Air Intake for maximum results. Shop for your Mustang Performance Products at GasSavingSolutions.com

Getting Started with Increasing Your Fuel Economy

March 16, 2009 by Hydrogen  
Filed under Tips

Vintage Racing at Sebring March 2009

Vintage Racing at Sebring March 2009

How to get started with Improving Your Fuel Economy? Here are some ideas that can make substantial gains in your Miles Per Gallon.

1) Get a tune up.
Change the spark plugs. Consider buying the new spark plugs that fire with twice the spark of conventional plugs. These plugs will increase the burn efficiency of your fuel and give increased MPG. At the least, install new plugs at least every 5,000 miles. With the increased Ethanol and other additives being added to our gasoline, increased fowling of plugs is a side effect.

2.) Add a “Cold Ram Air Intake System” to your engine.
You can gain power and MPG by changing your OEM air filter to a “Cold Air” or “Ram Air System” that consists of an engineered air box, cloth type filter and free flow induction tubing. These units are available for almost all cars and trucks. In combination with a free flow exhaust, the power and efficiency gains can be substantial. See the latest Air Intake Products for your car or truck at GasSavingSolutions.com.

3.) Change your OEM muffler to a Free Flow Exhaust System.
Reducing back pressure and restrictions in your vehicle’s exhaust allows it to breath more efficient and provide increased power and MPG. In combination with a Cold Air or Ram Air Intake system, the power and efficiency gains can be substantial.
See the latest Exhaust Products for your car or truck at GasSavingSolutions.com.

4.) Start using a high efficiency oil in your engine.
The use of high grade synthetic oil at your next oil change can do the following:
Increased horsepower and torque
Reduced wear
Improved fuel economy
Reduced heat
Reduced emissions
Performance gains vary depending on the type of vehicle, its condition, and the way it’s driven. We recommend Royal Purple Products for your engine, trans and differential. Buy Royal Purple Products at GasSavingSolutions.com.

5.) Start using an “on board” fuel consumption computer.
Having immediate feedback while you are driving is the only way to truly benefit from hypermiling techniques. These units plug into the computer of your engine and provide instant fuel mileage readouts, as well as average MPG. When you see the results of your efforts, it will provide you with the needed incentive to continue your hypermiling efforts. Check out the great pricing on the new AutoMeter Ecometer Fuel Consumption Gauge at GasSavingSolutions.com.

6.) Start using an on board “Programmer” to tune your engine’s computer for maximum efficiency.
This technology is available for most cars and trucks, whether gas or diesel powered.

These programmers increase the ‘timing” of fuel delivery to obtain a more complete “burn”. A more complete “burn” is the equivalent to getting more power out of the fuel that you already are using. These units allow your vehicle to run in a “higher” gear and downshift less, which consumes less fuel. In diesel engines, programmers increase fuel pressure, which in turn atomizes the fuel into a finer mist, increasing fuel burn efficiency and economy.

Check out the “Programmers” and other tuning technology available for your vehicle at GasSavingSolutions.com. Brands available include Edge, BullyDog, Hypertech, Super Chips and others.

Look for the Money Saving Packages of the products you need at GasSavingSolutions.com !!!!!